Axel Joost EASY RFID - Rogue Motorcycles

our store is closed until 6/8! online orders will be despatched from 6th of august


Your Cart is Empty

  • Axel Joost EASY RFID

    March 23: Unfortunately the manufactur of the antenna modules had stopped his production, resulting that this product is discontinued in some weeks when our stock is empty.


    This RFID keyless system have a much smaller power consumption in standby mode compare to other RFID devices without sucking the battery power what make it to the first choice for bikes what are not moved every day on the street. A small piezo beeper comes together with the module and can be connected for an acoustic response of a successful recognized key. 


    The easy RFID works with only one button. One press on the start button will activate the transponder module what looks for an electronic key (tag) for 15 seconds. The module switch on the ignition output if you hold an identified tag beside of the module within this time. The module switch off again no key is identified within 15 seconds. You can use the same button for the starter if the module have recognized a valid key id. The ignition and the Easy RFID module switch off if the start button is pressed again for a time below 1/4 second. The module have a teach in function what allow to use different standard keys (125 kHz, EM4100) in combination with this device. Just connect the orange cable to ground and bring your tag in the area above the Easy RFID. The build in led in the main module will flash 3 times or 4 times what indicate that the Easy RFID module knows and accept the tag for the bike in the future.


    By the way, the Easy RFID can learn the id of 2 different tags. So, a lost tag should not be a challenge anymore. The maximum reading distance is about 6-8 cm, depending of the antenna dimensions of the used key and the mounted position. 2 keys are included in the package. 


    Easy RFID


    Just feel free to download the installation manual (pdf) for further infos.


    Control module 40 mm x 25 mm x 12 mm, Antenna D19 mm x 19 mm

    Body material:

    shock resistant ABS plastic, waterresist potted

    Case Color:



    0,14 qmm for input, 1 qmm for power outputs

    Power consumption in operation:

    Below 1 mA

    Maximum temperature:

    80 degree Celsius

    Maximum output current: 20 Ampere for ignition, 3 Ampere for starter relay

    Input voltage range:

    7 - 18 Volt

    Maximum range of the tag:   

     6 - 8 cm, depending of the tag and mounting position